NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 108)

When the switch looks up on an unqualified host name, this field provides the domain
name. For example, if the default domain name is netgear.com and you enter
test ,
then test is changed to test.netgear.com to resolve the name). The maximum length
of the name is 255 characters.
8. In the Retry Number field, specify the number of times that the switch must retry to
send DNS queries to the DNS server.
Enter a number from 0 to 100. The default is 2.
9. In the Response Timeout (secs) field, specify the time in seconds that the switch
must wait for a response to a DNS query.
Enter a number from 0 to 3600. The default is 3.
10. From the Source Interface menu, select the interface that must be the source
interface for DNS. By default, the following options display in the menu:
• None: The primary IP address of the originating (outbound) interface is used as
the source address.
• VLAN 1: The primary IP address of VLAN 1 is used as the source address. This is
the default selection.
• Service Port: The management port IP address is used as the source address.
Depending on the configuration of your switch, the following options can display:
• Another VLAN ID: The primary IP address of a VLAN other than VLAN 1 is used
as the source address.
• Routing interface: The primary IP address of a routing interface is used as the
source address.
• Routing VLAN: The primary IP address of a VLAN routing interface is used as
the source address.
• Routing loopback interface: The primary IP address of a routing loopback
interface is used as the source address.
• Different: For some features, Different can display. This means that the source
interface is configured separately.
11. Click the Apply button.
Your settings are saved.
12. To save the settings to the running configuration, click the Save icon.
13. To add a DNS server to which the switch sends DNS queries, do the following:
a. In the DNS Server Address field in the DNS Server Configuration table, enter
an IP address in standard IPv4 or IPv6 dot notation.
b. Click the Add button.
Main User Manual 108 Configure Switch System
Information
Fully Managed Switches M4350 Series Main User Manual