Configure the interface members of an mvr group – NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual
Page 343
10. From the Immediate Leave menu, specify whether the Immediate Leave feature is
enabled by selecting Enable or Disable.
The default is Disable.
11. Click the Apply button.
Your settings are saved.
12. To save the settings to the running configuration, click the Save icon.
13. To refresh the page, click the Refresh button.
The Status field shows the status for each interface.
Configure the interface members of an MVR
group
You can add or remove interfaces as members of an MVR group.
To configure the interface members of an MVR group:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Switching > MVR > Advanced > MVR Group Membership.
The MVR Group Membership page display.
The ports for the switch (Unit 1) are displayed. If a stack is configured, the ports for
each stacked switch (Unit 1, Unit 2, and so on) are displayed, and you can select
ports on different stacked switches.
6. From the Group IP menu, select the IP address of the MVR group.
7. In the Ports table (or if a stack is configured, in one or more of the Ports tables), click
each port that you want to make a member of the MVR group.
Main User Manual
343
Configure Switching Information
Fully Managed Switches M4350 Series Main User Manual