Rename an existing diffserv class, Change the criteria for an existing diffserv class – NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual
Page 604
Table 150. DiffServ Class Configuration, Class Summary information
Description
Field
The configured match criteria for the specified class.
Match Criteria
The values of the configured match criteria.
Values
Rename an existing DiffServ class
You can change the name of an existing DiffServ class.
To rename an existing DiffServ class:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select QoS > DiffServ > Advanced > Class Configuration.
The Class Configuration page displays.
6. Select the check box next to the class name.
7. In the Class Name field, specify the new name.
8. Click the Apply button.
Your settings are saved.
9. To save the settings to the running configuration, click the Save icon.
Change the criteria for an existing DiffServ class
You can change the criteria for an existing DiffServ class.
To change the criteria for an existing DiffServ class:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
Main User Manual
604
Configure Quality of Service
Fully Managed Switches M4350 Series Main User Manual