beautypg.com

NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual

Page 810

background image

Src IP Mask: Specify the IP mask in dotted-decimal notation to be used with the
source IP address.

Rate Limit Conform Data Rate: Specify the value of the conforming data rate,
which is the data rate at which confirming traffic is limited. The range is from 1
to 4294967295 Kbps.

Rate Limit Burst Size: Specify the value of the burst size, which is the size at

which bursts of traffic above the confirming data rate are permitted. The range
is from 1 to 128 Kbps.

Time Range: From the Time Range menu, select the timer schedule that must
be associated with the rule. For more information about timer schedules, see
Timer schedules on page 180. If you did not set up any timer schedules, the menu
does not present any options.

9. Click the Apply button.

Your settings are saved.

The Rule Status field in the table shows if the rule is active or inactive. Blank means
that no timer schedule is associated with the rule.

10. To save the settings to the running configuration, click the Save icon.

Modify the match criteria for a basic IPv4 ACL rule

You can modify the match criteria for a basic IPv4 ACL rule.

To modify the match criteria for a basic IPv4 ACL rule:

1. Launch a web browser.

2. In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see Log in to the main UI with a web
browser
on page 27 and the subsections.

The login page displays.

3. Click the Main UI Login button.

The main UI login page displays in a new tab.

4. Enter admin as the user name, enter your local device password, and click the Login

button.

The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.

The System Information page displays.

5. Select Security > ACL > Advanced > IP Rules.

The IP Rules page displays.

6. From the ACL ID menu, select the ACL that includes the rule that you want to modify.

Main User Manual

810

Manage Switch Security

Fully Managed Switches M4350 Series Main User Manual