NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 821)

The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Security > ACL > Advanced > IPv6 ACL.
The IPv6 ACL page displays.
6. In the IPv6 ACL field, specify a name to identify the IPv6 ACL.
This is the IPv6 ACL name string, which includes up to 31 alphanumeric characters
only. The name must start with an alphabetic character.
7. Click the Add button.
The IPv6 ACL is added to the switch configuration.
8. To save the settings to the running configuration, click the Save icon.
The following table describes the view-only fields on the page.
Table 178. IPv6 ACL information
Description Field
The current number of ACLs configured on the switch. Current Number of ACL
The maximum number of IP ACLs that can be configured on the switch. Maximum ACL
The maximum number of ACLs that can be configured on the switch. Rules
The type is IPv6 ACL. Type
Change the name of an IPv6 ACL
You can change the name of an IPv6 ACL.
To change the name of an IPv6 ACL:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
Main User Manual 821 Manage Switch Security
Fully Managed Switches M4350 Series Main User Manual