NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 766)

The System Information page displays.
5. Select Security > Control > Dynamic ARP Inspection > DAI VLAN Configuration.
The DAI VLAN Configuration page displays.
The table lists the VLANs.
6. Select the check box for the VLAN.
7. From the Admin Mode menu, select Enable or Disable to specify if DAI is enabled
for the VLAN.
The default is Disable.
8. From the Invalid Packets menu, select Enable or Disable to specify if DAI logging
is enabled for the VLAN.
The default is Enable.
9. In the ARP ACL Name field, specify a name of an existing ARP ACL (see Create a
DAI access control list on page 768).
The ARP ACL is used for ARP packet validation. To remove an existing ARP ACL
name from the ARP ACL Name field, enter N/A.
10. From the Static Flag menu, select Enable or Disable to specify if the ARP packet
must be validated using the DHCP snooping database if the ARP ACL rule does not
match.
If enabled, the ARP packet is validated by the ARP ACL rule only. If disabled, the ARP
packet needs further validation by using the DHCP snooping database. The default
is Disable.
11. Click the Apply button.
Your settings are saved.
12. To save the settings to the running configuration, click the Save icon.
Configure DAI interfaces
You can configure one or more dynamic ARP inspection (DAI) interfaces.
To configure one or more DAI interfaces:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
Main User Manual 766 Manage Switch Security
Fully Managed Switches M4350 Series Main User Manual