NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 336)

To configure an MLD snooping querier for a VLAN:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Switching> Multicast > MLD Snooping > Querier VLAN Configuration.
The Querier VLAN Configuration page displays.
6. Either specify a new VLAN or change an existing VLAN:
• Specify a new VLAN: In the VLAN ID field, enter the ID for a new VLAN.
• Change an existing VLAN: Select the check box for an existing VLAN.
7. From the Querier Election Participate Mode menu, select to enable or disable the
querier election participate mode:
• Disabled: If the switch detects another querier of the same version in the VLAN,
the snooping querier moves to the non-querier state.
• Enabled: The snooping querier participates in querier election, in which the
lowest numbered IPv6 address operates as the querier in that VLAN. The other
querier moves to non-querier state.
8. In the Querier VLAN Address field, specify the IPv6 address to be used as the source
address in periodic IGMP queries that are sent on the VLAN.
9. Either add the new VLAN or save the settings for the existing VLAN:
• Add the new VLAN: Click the Add button.
The VLAN is added.
• Save the settings for the existing VLAN: Click the Apply button.
Your settings are saved.
10. To save the settings to the running configuration, click the Save icon.
The following table describes the view-only fields on the page.
Main User Manual 336 Configure Switching Information
Fully Managed Switches M4350 Series Main User Manual