NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 453)

The VRRP Secondary IP Address Configuration page displays. The page shows
different sections.
6. From the VRRP Interface menu, select the VRRP interface.
7. From the VRRP ID menu, select the VRID.
8. Select the check box for the secondary IP address.
9. In the Secondary IP Address field, change the IP address.
10. Click the Apply button.
Your settings are saved.
11. To save the settings to the running configuration, click the Save icon.
Remove a secondary virtual router
You can remove a secondary virtual router that you no longer need.
To remove a secondary virtual router:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Routing > VRRP > Advanced > VRRP Secondary IP Address Configuration.
The VRRP Secondary IP Address Configuration page displays. The page shows
different sections.
6. From the VRRP Interface menu, select the VRRP interface.
7. From the VRRP ID menu, select the VRID.
8. Select the check box for the secondary IP address.
9. Click the Delete button.
Main User Manual 453 Manage Routing
Fully Managed Switches M4350 Series Main User Manual