NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 195)

(Continued)
Behavior when enabled Default Trap
A trap is sent when The OSPFv2 link-state database (LSDB) is
overflowing, that is, the LSDB can no longer be maintained
because of resource constraints. Disable Lsdb-overflow
A trap is sent when a critical threshold in the size of the
OSPFv2 LSDB is exceeded. Disable Lsdb-approaching-overflow
Retransmit
A trap is sent when an OSPFv2 packet is retransmitted. Disable Packets
A trap is sent when a virtual OSPFv2 packet is retransmitted. Disable Virt-packets
State-change
A trap is sent when the state of an OSPFv2 interface changes. Disable If-state-change
A trap is sent when the state of an OSPFv2 neighbor changes. Disable Neighbor-state-change
A trap is sent when the state of a virtual OSPFv2 interface
changes. Disable Virtif-state-change
A trap is sent when the state of a virtual OSPFv2 neighbor
changes. Disable Virtneighbor-state-change
OSPFv3 Traps
Errors
A trap is sent when a corrupt OSPFv3 packet is detected. Disable Bad-packet
A trap is sent when an OSPFv3 configuration error occurs. Disable Config-error
A trap is sent when a corrupt virtual OSPFv3 packet is
detected. Disable Virt-bad-packet
A trap is sent when a virtual OSPFv3 configuration error
occurs. Disable Virt-config-error
LSA
A trap is sent when the maximum age of an OSPFv3 link-state
advertisement (LSA) is exceeded. Disable LSA-maxage
A trap is sent when an OSPFv3 LSA originates from the switch
(or one of its routing interfaces), for example, when the
topology changes. Disable LSA-originate
Overflow
A trap is sent when The OSPFv3 link-state database (LSDB) is
overflowing, that is, the LSDB can no longer be maintained
because of resource constraints. Disable Lsdb-overflow
A trap is sent when a critical threshold in the size of the
OSPFv3 LSDB is exceeded. Disable Lsdb-approaching-overflow
Main User Manual 195 Configure Switch System
Information
Fully Managed Switches M4350 Series Main User Manual