NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 514)

• Enable: The type of route can be redistributed.
• Disable: The type of route cannot be redistributed.
8. In the Metric Value field, set the metric value for the type of route.
If the type of route is preconfigured, the metric value displays, but you can change
it. The range is from 0 to 16777214.
9. From the Metric Type menu, select the type of metric that must used for the type
of route:
• External Type 1: External type 1 metrics that are comparable to the OSPFv3
metric.
• External Type 2: External type 2 metrics that are assumed to be larger than the
cost of the OSPFv3 metric.
10. In the Tag field, set the tag for the type of route.
If the type of route is preconfigured, the tag displays, but you can change it. The
range is from 0 to 4294967295.
11. Click the Apply button.
Your settings are saved.
12. To save the settings to the running configuration, click the Save icon.
Configure OSPFv3 nonstop forwarding
OSPFv3 nonstop forwarding (NSF) ensures that OSPF routing continues by temporarily
letting other devices in the network perform OSPFv3 routing for the switch. That means
that even if the switch restarts, OSPFv3 routing can continue. (We refer to this type of
restart process as a graceful restart.)
To configure OSPFv3 NSF:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
Main User Manual 514 Configure OSPF and OSPFv3
Fully Managed Switches M4350 Series Main User Manual