NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 127)

5. Select System > Services > DHCP Server > DHCP Class Configuration.
The DHCP Class Configuration page displays.
6. From the Class Name menu, select the class.
7. In the Remote ID field, specify the ID of the remote host from which the DHCP
request can be accepted.
The remote ID can be a name, caller ID, product ID, IP address, and so on.
8. In the Circuit ID field, specify the ID of the circuit from which the DHCP request can
be accepted.
The circuit ID can also be an interface or VLAN number.
9. Click the Add button.
Your settings are saved. The class is added.
10. To add another set of suboptions for the same class, repeat the previous three steps.
11. To save the settings to the running configuration, click the Save icon.
Manage DHCP pools
You can set up and manage different types of pools of IP addresses that the DHCP
server can assign.
Create a DHCP pool
You can create a DHCP pool and configure multiple settings for the pool.
To create a DHCP pool:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
Main User Manual 127 Configure Switch System
Information
Fully Managed Switches M4350 Series Main User Manual