beautypg.com

NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual

Page 707

background image

-

1: If no switch stack is configured, the physical interfaces for the switch are
displayed.

-

Unit ID for a stacked switch: If a switch stack is configured, the physical
interfaces for the switch with the selected stack unit ID are displayed.

LAG: Only LAGs are displayed.

All: Both physical interfaces and LAGs are displayed, or for a switch stack, both
physical interfaces on all switches in the stack and LAGs are displayed.

7. Select one or more interfaces by taking one of the following actions:

To configure a single interface, select the check box associated with the interface,
or type the interface number in the Go To Interface field and click the Go button.

To configure multiple interfaces with the same settings, select the check box
associated with each interface.

To configure all interfaces with the same settings, select the check box in the
heading row.

8. Specify the following settings:

Security Mode: Enable or disable the port security feature. The default is Disable.

Max Learned MAC Address: Specify the maximum number of dynamically
learned MAC addresses. The default value is 4096. If you specify 0, the interface
does not learn any MAC addresses.

Max Static MAC Address: Specify the maximum number of statically locked
MAC addresses. The default value is 48.

Violation Shutdown: Enable or disable shutdown if a packet with a disallowed
MAC address is received. The default is Disable.

Violation Trap: Enable or disable sending of violation traps if a packet with a
disallowed MAC address is received. The default is Disable.

9. Click the Apply button.

Your settings are saved.

10. To save the settings to the running configuration, click the Save icon.

Display learned MAC addresses and convert
them to static addresses

After you enable port security globally (see Configure the global port security mode
on page 705) and enable port security for specific interfaces (see Configure a port security
interface
on page 706), you can convert a dynamically learned MAC address to a statically
locked address.

Main User Manual

707

Manage Switch Security

Fully Managed Switches M4350 Series Main User Manual