NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 754)

• Local: The binding table is stored locally on the switch.
• Remote: The binding table is stored on a remote TFTP server.
If the database is stored on a remote server, specify the following information:
- Remote IP Address: Specify the IP address of the TFTP server.
- Remote File Name: Specify the file name of the DHCPv6 snooping bindings
database in which the bindings are stored.
7. In the Write Delay field, specify the time that the switch must wait after writing
binding information to persistent storage.
The delay allows the switch to collect as many entries as possible (new and removed)
before writing them to the persistent file. You can specify from 15 to 86400 seconds.
By default, the delay is 300 seconds.
8. Click the Apply button.
Your settings are saved.
9. To save the settings to the running configuration, click the Save icon.
Display or clear DHCPv6 snooping statistics
You can display and clear per-interface statistics about the DHCPv6 messages filtered
by the DHCPv6 snooping feature on untrusted interfaces.
To display or clear the DHCPv6 snooping statistics:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Security > Control > DHCPv6 Snooping > Statistics.
The Statistics page displays.
Main User Manual 754 Manage Switch Security
Fully Managed Switches M4350 Series Main User Manual