NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 621)

- 1: If no switch stack is configured, the physical interfaces for the switch are
displayed.
- Unit ID for a stacked switch: If a switch stack is configured, the physical
interfaces for the switch with the selected stack unit ID are displayed.
• LAG: Only LAGs are displayed.
• All: Both physical interfaces and LAGs are displayed, or for a switch stack, both
physical interfaces on all switches in the stack and LAGs are displayed.
7. Select one or more interfaces by taking one of the following actions:
• To configure a single interface, select the check box associated with the interface,
or type the interface number in the Go To Interface field and click the Go button.
• To configure multiple interfaces with the same settings, select the check box
associated with each interface.
• To configure all interfaces with the same settings, select the check box in the
heading row.
8. From the Policy In Name menu, select the name of a policy for inbound traffic.
9. From the Policy Out Name menu, select the name of a policy for outbound traffic.
10. Click the Apply button.
Your settings are saved.
11. To save the settings to the running configuration, click the Save icon.
The following table describes the view-only fields on the page.
Table 153. Service Interface Configuration information
Description Field
The traffic direction (In, Out, or both In and Out) of the policy or policies on the service
interface. Direction
The operational status of this service interface (either Up or Down).
The operational status is shown as Up if all of the following conditions are true:
• The attached class is valid and includes at least one matching rule.
• The attached policy is valid and includes at least one attribute.
• The port is enabled, that is, the physical link of the port is in the up state.
Operational Status
Change one or both DiffServ policies for an interface
You can change the inbound policy, outbound policy, or both policies for an interface.
Main User Manual 621 Configure Quality of Service
Fully Managed Switches M4350 Series Main User Manual