NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 414)

20. From the Adv Other Config Flag menu, select Enable or Disable to enable or
disable the router advertisement “other stateful configuration flag” for the interface.
The default is Disable. The other stateful configuration flag informs an IPv6 host to
use DHCPv6 to get additional configuration information such as, for example, the
IPv6 address of a DNS server.
21. From the Router Preference menu, select the router preference advertisements for
the interface.
You can select High, Medium, or Low. The default is Medium.
22. In the Adv Suppress Flag list, select Enable or Disable to enable or disable the
router advertisement suppression for the interface.
The default is Disable.
23. From the Destination Unreachables menu, select Enable or Disable to enable or
disable the transmission of ICMPv6 destination unreachables message on the
interface.
The default is Enable.
24. Click the Apply button.
Your settings are saved.
25. To save the settings to the running configuration, click the Save icon.
The following table describes the view-only fields on the page.
Table 107. IPv6 interface configuration information
Description Field
The operational state of an interface. The default is Disable. Operational Mode
Indicates if the link is up or down (Link Up or Link Down). Link State
Configure prefix settings for an IPv6 routing
interface
You can add or change one or more prefixes and associated settings for an IPv6 routing
interface.
To add or change prefix settings for an IPv6 routing interface:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
Main User Manual 414 Manage Routing
Fully Managed Switches M4350 Series Main User Manual