NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 883)

• SCP: Secure Copy Protocol. This selection requires you to specify a user name
and password.
• FTP: File Transfer Protocol. This selection requires you to specify a user name
and password.
8. From the Server Address Type menu, select the format for the Server Address
field:
• IPv4: Indicates that the server address is an IPv4 address in dotted-decimal
format. This is the default setting.
• IPv6: Indicates that the server address is an IPv6 address in hexadecimal numbers
using 16-bit values between colons.
• DNS: Indicates that the server address is a host name.
9. In the Server Address field, enter the IP address of the server in accordance with
the format indicated by the server address type.
The default is the IPv4 address 0.0.0.0.
10. In the Remote File Path field, specify the path on the server where you want to save
the file.
The path name can include alphabetic, numeric, forward slash, dot, or underscore
characters only. You can enter up to 160 characters.
11. In the Remote File Name field, specify a destination file name for the file to be
exported.
You can enter up to 32 characters.
12. If you select Script File from the File Type menu, specify the name of the script file
in the Local File Name field.
13. If you select SFTP, SCP, or FTP from Transfer Mode menu, specify the following
settings:
• User Name: Specify the user name for remote login to the server.
• Password: Specify the password for remote login to the server.
14. Click the Apply button.
The file is exported (uploaded) to the server. The page displays information about
the progress of the file transfer.
Main User Manual 883 Maintenance and
Troubleshooting
Fully Managed Switches M4350 Series Main User Manual