NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual
Page 71
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select System > Management > USB Device Information.
The USB Device Information page displays.
The Device Status field displays the current status of the device. The status is one of
the following:
•
Active: The device is USB plugged in and recognized by the switch.
•
Inactive: The device is not mounted.
•
Invalid: The device is not present or an invalid device is plugged in.
6. To refresh the page, click the Refresh button.
The following table describes the information in the USB Memory Statistics section.
Table 9. USB Memory Statistics information
Description
Field
The USB flash device storage size in bytes.
Total Size
The size of memory used on the USB flash device.
Bytes Used
The size of memory free on the USB flash device.
Bytes Free
The following table describes the information in the USB Directory Details section.
Table 10. USB Directory Details information
Description
Field
The name of the file stored in the USB flash drive.
File Name
The size of the file stored in the USB flash drive in bytes
File Size
The last modification time of the file stored in the USB flash drive.
Modification Time
Display information about a stack and
optional switch models for a stack
You can display information about an existing stack of M4350 series switches and
optional switch models that are compatible with a stack of M4350 series switches.
Main User Manual
71
Configure Switch System
Information
Fully Managed Switches M4350 Series Main User Manual