Hhtp and https management access, Configure the http access settings – NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual
Page 660
Table 159. Login Sessions
Description
Field
Identifies the ID of this row
ID
The name of the user for whom the session is open
User Name
The IP address of the computer from which the user is connected
Connection From
The idle session time, if any
Idle Time
The total session time
Session Time
The type of session: Telnet, Serial, SSH, HTTP, or HTTPS
Session Type
HHTP and HTTPS management
access
You can configure HTTP and secure HTTP (HTTPS) access to the switch’s management
interface.
Configure the HTTP access settings
You can configure the HTTP access settings on the switch. If you access the switch device
UI, HTTP is the default access method.
To configure the HTTP access settings:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Security > Access > HTTP > HTTP Configuration.
Main User Manual
660
Manage Switch Security
Fully Managed Switches M4350 Series Main User Manual