NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 617)

The following table describes the view-only fields on the page.
Table 152. DiffServ policy configuration, policy attributes
Description Field
The name of the DiffServ policy Policy Name
The type of the policy (In or Out) Policy Type
The class instances that are associated within the policy Member Class Name
Rename an existing DiffServ policy
You can change the name of an existing DiffServ policy.
To rename an existing DiffServ policy:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select QoS > DiffServ > Advanced > Policy Configuration.
The Policy Configuration page displays.
6. Select the check box next to the policy name.
7. In the Policy Name field, specify the new name.
8. Click the Apply button.
Your settings are saved.
9. To save the settings to the running configuration, click the Save icon.
Main User Manual 617 Configure Quality of Service
Fully Managed Switches M4350 Series Main User Manual