NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 656)

The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Security > Management Security > Authentication List > Dot1x
Authentication List.
The Dot1x Authentication List page displays.
6. Select the check box for the dot1x list.
7. Select the authentication method that must be used:
• Ias: The user’s ID and password in the internal authentication server (IAS) database
is used for authentication.
• None: The user is allowed access without authentication.
• Radius: The user's name and password are authenticated using the RADIUS
server instead of the local server.
8. Click the Apply button.
Your settings are saved.
9. To save the settings to the running configuration, click the Save icon.
Configure the HTTP authentication list
You can configure the HTTP authentication list, which specifies the authentication
methods to validate switch or port access through HTTP, for example, through a web
browser session. Only a single HTTP authentication list exists, which, by default, uses
local authentication.
To configure the HTTP authentication list:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
Main User Manual 656 Manage Switch Security
Fully Managed Switches M4350 Series Main User Manual