NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 288)

The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Switching > STP > Advanced > CST Port Status.
The CST Port Status page displays.
6. Select whether to display physical interfaces, LAGs, or both by clicking one of the
following links above the table heading:
• 1 or Unit ID for a stacked switch:
- 1: If no switch stack is configured, the physical interfaces for the switch are
displayed.
- Unit ID for a stacked switch: If a switch stack is configured, the physical
interfaces for the switch with the selected stack unit ID are displayed.
• LAG: Only LAGs are displayed.
• All: Both physical interfaces and LAGs are displayed, or for a switch stack, both
physical interfaces on all switches in the stack and LAGs are displayed.
7. To refresh the page, click the Refresh button.
The following table describes the view-only fields on the page.
Table 67. CST interface status information
Description Field
The physical interface or LAG that is associated with the CST Interface
The port identifier for port in the CST, which is created from the port
priority and the interface number Port ID
Indicates the current STP state of the interface. If enabled, the port state
determines what forwarding action is taken on traffic. Possible port states
are as follows:
• Disabled: STP is currently disabled on the interface. The interface
forwards traffic while learning MAC addresses.
• Blocking: The interface is currently blocked and cannot be used to
forward traffic or learn MAC addresses.
• Listening: The interface is currently in the listening mode. The interface
cannot forward traffic nor can it learn MAC addresses.
• Learning. The interface is currently in the learning mode. The interface
cannot forward traffic. However, it can learn new MAC addresses.
• Forwarding: The interface is currently in the forwarding mode. The
interface can forward traffic and learn new MAC addresses.
• Manual forwarding: The interface is currently in the manual forwarding
mode. The interface can forward traffic and learn new MAC addresses
Port Forwarding State
Main User Manual 288 Configure Switching Information
Fully Managed Switches M4350 Series Main User Manual