NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 225)

To display or clear ISDP neighbor information:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select System > ISDP > Advanced > Neighbor.
The Neighbor page displays.
6. To search for a neighbor, from the Search menu, select Device ID or Interface, and
in the field, enter the device ID or interface number.
7. To refresh the page, click the Refresh button.
8. To clear the ISDP neighbor information, click the Clear button.
All information on the page is cleared.
9. To save the settings to the running configuration, click the Save icon.
The following table describes the view-only fields on the page.
Table 57. ISDP neighbor information
Description Field
The device ID of the ISDP neighbor. Device ID
The interface on which the neighbor is discovered. Interface
The IP address of the neighbor. Address
Main User Manual 225 Configure Switch System
Information
Fully Managed Switches M4350 Series Main User Manual