NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 946)

Table 192. Switching features default settings (Continued)
Default Feature Name/Setting
Disabled Admin mode, interface
Auto-VLAN, Auto-WiFi
Disabled Admin mode, global
7 Priority
Disabled Admin mode, interface
Routing, OSPF, OSPFv3, and
multicast features default settings
The following table describes the default settings for the routing, OSPF, OSPFv3, and
multicast features that you can configure.
(View-only settings are not included in the table but might be included in the data sheet,
which you can download by visiting netgear.com/support/download/.)
Table 193. Routing, OSPF, OSPFv3, and multicast features default settings
Default Feature Name/Setting
Routing Table, Route Preference
1 Static
120 RIP
110 OSPF Intra
110 OSPF Inter
110 OSPF External
IP, Global
Enabled Routing mode
64 ICMP echo replies
Disabled ICMP redirects
1000 ICMP rate limit interval
100 ICMP rate limit burst size
Not configured Global default gateway
Main User Manual 946 Software Default Settings and
Hardware Specifications
Fully Managed Switches M4350 Series Main User Manual