NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 302)

To display the PVST statistics:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Switching > STP > Advanced > PVST Statistics.
The PVST Statistics page displays.
6. To refresh the page, click the Refresh button.
If PVST is enabled, the following table describes the view-only fields on the page.
Table 72. PVST statistics information
Description Field
Fast Backbone
The number of fast backbone transitions Transitions via Fast Backbone
The number of received inferior Bridge Protocol Data Units (BPDUs) Inferior BPDUs received
The number of received Root Link Query (RLQ) request Protocol Data
Units (PDUs) RLQ Request PDUs Received
The number of received RLQ response PDUs RLQ Response PDUs Received
The number of transmitted RLQ request PDUs RLQ Request PDUs Sent
The number of transmitted RLQ response PDUs RLQ Response PDUs Sent
Fast Uplink
The number of fast uplink transitions Fast Uplink Transitions
The number of transmitted proxy multicast addresses Proxy Multicast Addresses
Transmitted
The name of the VLAN on which PVST is enabled Name
The interfaces that are transmitting traffic for the VLAN, either as tagged
or as untagged frames Interface List
Main User Manual 302 Configure Switching Information
Fully Managed Switches M4350 Series Main User Manual