NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 128)

5. Select System > Services > DHCP Server > DHCP Pool Configuration.
The DHCP Pool Configuration page displays.
6. From the Pool Name menu, select Create.
The Pool Name field displays.
7. In the Pool Name field, type a name for the new pool.
The name can be up to 31 characters in length.
8. Select the type of binding for the pool:
• Unallocated: No further configurations are required. Continue with the next step.
• Dynamic: Configure the following settings:
- Network Address. The subnet IP address for the dynamic DHCP pool.
- Network Mask: The network mask for the dynamic DHCP pool.
- Network Prefix Length: The subnet number for the dynamic DHCP pool.
The range is from 0 to 32.
NOTE: For a dynamic DHCP pool, you can configure either the network
mask or the prefix length.
• Manual: Configure the following settings:
- Client Name: The DHCP client name.
- Hardware Address: The hardware MAC address of the DHCP client.
- Hardware Address Type: The protocol of the MAC address of the DHCP
client. The type can be Ethernet or IEEE802. The default is Ethernet.
- Client ID: The client ID of the DHCP client.
- Host Number: The IP address for the manual binding of the DHCP client.
- Host Mask: The subnet mask for the manual binding of the DHCP client.
- Host Prefix Length: The subnet mask for the manual binding of the DHCP
client. The range is from 0 to 32.
NOTE: For a manually added DHCP client, you can configure either
the network mask or the prefix length.
9. From the Lease Time menu, select how the binding is leased:
• Infinite: For a dynamic binding, infinite is a lease period of 60 days. For manually
added binding, the lease period is indefinite. No further configurations are
required. Continue with the next step.
• Specified Duration: Configure the following settings:
Main User Manual 128 Configure Switch System
Information
Fully Managed Switches M4350 Series Main User Manual