NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 137)

Information about the binding displays.
The following table describes the view-only fields on the page.
Table 35. DHCP conflicts information
Description Field
The IP address of the DHCP client. IP Address
The hardware address if the DHCP client. Hardware Address
The method with which the IP address of the DHCP client was detected
on the DHCP server. Detection Method
The time when the conflict was detected in the
days;hours;minutes;seconds format since the switch was last restarted. Detection Time
Delete one or all DHCP bindings with
conflicts
To delete one or all DHCP bindings with conflicts:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select System > Services > DHCP Server > DHCP Conflicts Information.
The DHCP Conflicts Information page displays.
6. Select one of the following radio buttons:
• All Address Conflicts: All bindings with IP address conflicts must be cleared.
• Specific Address Conflict: In the field, specify the IP address of the binding with
a conflict that must be cleared.
7. Click the Clear button.
Main User Manual 137 Configure Switch System
Information
Fully Managed Switches M4350 Series Main User Manual