beautypg.com

NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual

Page 350

background image

6. Select whether to display physical interfaces, LAGs, or both by clicking one of the

following links above the table heading:

1 or Unit ID for a stacked switch:

-

1: If no switch stack is configured, the physical interfaces for the switch are
displayed.

-

Unit ID for a stacked switch: If a switch stack is configured, the physical
interfaces for the switch with the selected stack unit ID are displayed.

LAG: Only LAGs are displayed.

All: Both physical interfaces and LAGs are displayed, or for a switch stack, both
physical interfaces on all switches in the stack and LAGs are displayed.

7. Select one or more interfaces by taking one of the following actions:

To configure a single interface, select the check box associated with the interface,
or type the interface number in the Go To Interface field and click the Go button.

To configure multiple interfaces with the same settings, select the check box
associated with each interface.

To configure all interfaces with the same settings, select the check box in the
heading row.

8. From the STP Mode menu, select to enable or disable the Spanning Tree Protocol

administrative mode for the port or LAG.

The default is Enable.

9. From the Admin Mode menu, select to enable or disable the administrative mode

for the port or LAG.

For the port or LAG to participate in the network, you must select Enable. The default
is Enable.

10. From the LACP Mode menu, select to enable or disable the Link Aggregation Control

Protocol administrative mode for the port.

The mode must be enabled for the port to participate in link aggregation. The default
is Enable.

11. From the Autonegotiation menu, select to enable or disable the speed

autonegotiation mode for the port.

The default is Enable.

12. To change the speed for the port, in the Speed field, type the supported speed:

For Gigabit Ethernet ports:

Auto: The speed is set by the auto-negotiation process. This is the default setting.

1000: The speed is set to 1000 Mbits/second.

100: The speed is limited to 100 Mbits/second.

Main User Manual

350

Configure Switching Information

Fully Managed Switches M4350 Series Main User Manual