NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 524)

Description Field
The protocol version of the DVMRP, which is always 3. Version
The number of routes in the DVMRP routing table. Total Number of
Routes
The number of reachable routes in the DVMRP routing table. A reachable route has
a metric that lets the switch reach the endpoint. Reachable Routes
Configure a DVMRP interface
You can configure one or more DVMRP interfaces, which are interfaces from which the
switch sends DVMRP messages that let the multicast delivery tree compute the route
cost to reach the switch.
To configure a DVMRP interface:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Routing > Multicast > DVMRP > Interface Configuration.
The DVMRP Interface Configuration page displays.
6. Select whether to display physical interfaces, VLANs, or both by clicking one of the
following links above the table heading:
• 1 or Unit ID for a stacked switch:
Main User Manual 524 Configure Multicast Routing
Fully Managed Switches M4350 Series Main User Manual