NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 753)

4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Security > Control > DHCPv6 Snooping > Binding Configuration.
The Binding Configuration page displays.
6. In the Static Binding Configuration table, select the check box for the static binding.
7. Click the Delete button.
The DHCPv6 snooping binding entry is removed from the database.
8. To save the settings to the running configuration, click the Save icon.
Configure DHCPv6 snooping persistent
settings
You can configure the persistent location of the DHCPv6 snooping bindings database.
The bindings database can be stored locally on the switch or on a remote device in the
network. The switch must be able to reach the IP address of the remote device to send
bindings to a remote database.
To configure DHCPv6 snooping persistent settings:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Security > Control > DHCPv6 Snooping > Persistent Configuration.
The Persistent Configuration page displays.
6. Specify where the DHCPv6 snooping bindings database is located.
Main User Manual 753 Manage Switch Security
Fully Managed Switches M4350 Series Main User Manual