beautypg.com

NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual

Page 758

background image

If you do not know the IP address of the switch, see Log in to the main UI with a web
browser
on page 27 and the subsections.

The login page displays.

3. Click the Main UI Login button.

The main UI login page displays in a new tab.

4. Enter admin as the user name, enter your local device password, and click the Login

button.

The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.

The System Information page displays.

5. Select Security > Control > IP Source Guard > Binding Configuration.

The Binding Configuration page displays.

6. From the Interface menu, select the interface.

7. In the MAC Address field, specify the MAC address for the binding to be added.

This is the key to the binding database.

8. From the VLAN ID menu, select the ID of the VLAN.

9. In the IP Address field, specify the IP address for the binding to be added.

10. Click the Add button.

The IPSG static binding entry is added to the database.

The Filter Type field displays if IPSG is configured to function with the source IP
address only or, if port security is also enabled for IPSG, with both the source IP
address and MAC address.

The Dynamic Binding Configuration table shows information about the IPSG bindings
that were learned on each interface on which IPSG is enabled. The following table
describes the dynamic binding information.

Description

Field

The interface on which the IPSG source binding was learned.

Interface

The MAC address associated with the IPSG source device. This is the key to the
binding database.

MAC Address

The VLAN ID for the interface of the IPSG source device.

VLAN ID

The IP address of the IPSG source device.

IP Address

The filter type used on the switch interface. Either IPSG is configured to function with
the source IP address only or, if port security is also enabled for IPSG, with both the
source IP address and MAC address.

Filter Type

11. To save the settings to the running configuration, click the Save icon.

Main User Manual

758

Manage Switch Security

Fully Managed Switches M4350 Series Main User Manual