NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 531)

The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Routing > Multicast > IGMP > Global Configuration.
The Global Configuration page displays.
6. Select the Admin Mode Enable or Disable radio button to enable or disable IGMP
on the switch.
The default is Disable.
7. Click the Apply button.
Your settings are saved.
8. To save the settings to the running configuration, click the Save icon.
Configure an IGMP routing interface
You can configure one or more IGMP routing interfaces.
To configure an IGMP routing interface:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select the Routing > Multicast > IGMP > Routing Interface Configuration.
The Routing Interface Configuration page displays.
6. Select whether to display physical interfaces, VLANs, or both by clicking one of the
following links above the table heading:
• 1 or Unit ID for a stacked switch:
Main User Manual 531 Configure Multicast Routing
Fully Managed Switches M4350 Series Main User Manual