NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 545)

4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Routing > Multicast > PIM > Interface Configuration.
The Interface Configuration page displays.
6. Select whether to display physical interfaces, VLANs, or both by clicking one of the
following links above the table heading:
• 1 or Unit ID for a stacked switch:
- 1: If no switch stack is configured, the physical interfaces for the switch are
displayed.
- Unit ID for a stacked switch: If a switch stack is configured, the physical
interfaces for the switch with the selected stack unit ID are displayed.
• VLANS: Only VLANs are displayed.
• All: Both physical interfaces and VLANs are displayed, or for a switch stack, both
physical interfaces on all switches and VLANs are displayed.
7. Select one or more interfaces by taking one of the following actions:
• To configure a single interface, select the check box associated with the interface,
or type the interface number in the Go To Interface field and click the Go button.
• To configure multiple interfaces with the same settings, select the check box
associated with each interface.
• To configure all interfaces with the same settings, select the check box in the
heading row.
8. From the Admin Mode menu, select Enable or Disable to enable or disable PIM
for the interface.
The default is Disable.
9. In the Hello Interval field, specify the period in seconds between the transmission
of PIM hello messages on the interface.
The range is from 0 to 18000. The default is 30.
10. In the Join/Prune Interval field, specify period in seconds at which PIM Join/Prune
messages are transmitted on the interface.
The range is from 0 to 18000. The default is 60.
11. From the BSR Border menu, select Enable or Disable to enable or disable the
bootstrap router (BSR) border on the interface.
The default is Disable.
Main User Manual 545 Configure Multicast Routing
Fully Managed Switches M4350 Series Main User Manual