NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 424)

12. In the Preference field, specify the preference for the route.
The range is from 1 to 255. You can add the preference for a new route or change
the preference for an existing route.
13. Do one of the following:
• If you are adding a new route, click the Add button.
Your settings are saved. The route is added.
• If you are changing an existing route, click the Apply button.
Your settings are saved.
14. To save the settings to the running configuration, click the Save icon.
Delete an IPv6 static route
You can delete an IPv6 static route that you no longer need.
To delete an IPv6 static route:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Routing > IPv6 > Advanced > Static Route Configuration.
The Static Route Configuration page displays.
6. Select the check box for the route.
7. Click the Delete button.
Your settings are saved. The route is removed.
8. To save the settings to the running configuration, click the Save icon.
Main User Manual 424 Manage Routing
Fully Managed Switches M4350 Series Main User Manual