Clear all interfaces in a link dependency group – NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual
Page 221
The following table describes the view-only fields in the Link Dependency Group
Statistic section.
Table 55. Link dependency group statistic information
Description
Field
The group ID. The range is from 1 to 16.
Group ID
The action to be performed on downstream interfaces when all the
interfaces in the upstream list go down.
Link Action
The current state of the group.
Group State
The number of group transitions.
Group Transitions
The time of the last group transition.
Last Transition Time
Clear all interfaces in a link dependency
group
You can clear all interfaces in a link dependency group. After you do so, the upstream
list and downstream list for the group do not include any interfaces.
To clear all interfaces in a link dependency group:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select System > Link Dependency > Link Dependency Interface Configuration.
The Link Dependency Interface Configuration page displays.
6. In the Link Dependency Group ID section, from the Group ID menu, select the group
ID for which you want to display or configure the settings.
The range for the group ID is from 1 to 16.
Main User Manual
221
Configure Switch System
Information
Fully Managed Switches M4350 Series Main User Manual