beautypg.com

Configure ipv6 static routes – NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual

Page 423

background image

Configure IPv6 static routes

You can add or change a static IPv6 route.

To add or change a static IPv6 route:

1. Launch a web browser.

2. In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see Log in to the main UI with a web
browser
on page 27 and the subsections.

The login page displays.

3. Click the Main UI Login button.

The main UI login page displays in a new tab.

4. Enter admin as the user name, enter your local device password, and click the Login

button.

The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.

The System Information page displays.

5. Select Routing > IPv6 > Advanced > Static Route Configuration.

The Static Route Configuration page displays.

6. If you are changing en existing route, select the check box for the route.

The only field you can change is the preference for the route.

7. If you are adding a new route, in the IPv6 Prefix field, specify the IPv6 prefix for the

route.

8. If you are adding a new route, in the Prefix Length field, specify the IPv6 prefix

length for the route.

9. If you are adding a new route, from the Next Hop IPv6 Address Type menu, select

one of the following options:

Global: Create a global IPv6 route by specifying the interface for the route.

Link-Local: Create a link-local IPv6 address by specifying the interface and the
next hop address for the route.

Static-Reject: Create a static-reject route for a destination prefix. You cannot
specify an interface or a next hop address for the route.

10. If you are adding a new route and selected Global or Link-Local from the Next Hop

IPv6 Address Type menu, specify the IPv6 address for the next hop in the Next
Hop IPv6 Address
field.

11. If you are adding a new route and selected Link-Local from the Next Hop IPv6

Address Type menu, specify the interface for the route.

Main User Manual

423

Manage Routing

Fully Managed Switches M4350 Series Main User Manual