beautypg.com

View the dvmrp routes – NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual

Page 529

background image

Description

Field

The group IP address that was pruned.

Group IP

The IP address that is used with the source mask to identify the source network.

Source IP

The network mask used with the source IP address.

Source Mask

The period remaining before the prune expires at the upstream neighbor. If no prune
messages are received from downstream neighbors, this period is set to the value of
the default prune lifetime time; otherwise, it is set to the smallest received value or
the default timer, whichever is smaller.

Expiry Time

View the DVMRP routes

If DVMRP is enabled, you can view DVMRP the routes that are being advertised.

To view the DVMRP routes:

1. Launch a web browser.

2. In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see Log in to the main UI with a web
browser
on page 27 and the subsections.

The login page displays.

3. Click the Main UI Login button.

The main UI login page displays in a new tab.

4. Enter admin as the user name, enter your local device password, and click the Login

button.

The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.

The System Information page displays.

5. Select Routing > Multicast > DVMRP > DVMRP Route.

The DVMRP Route page displays.

6. To refresh the page, click the Refresh button.

The following tables describe the view-only fields on the page.

Table 125. DVMRP route information

Description

Field

The IP address that is used with the source mask to identify the source network.

Source IP

The network mask used with the source IP address.

Source Mask

Main User Manual

529

Configure Multicast Routing

Fully Managed Switches M4350 Series Main User Manual