beautypg.com

NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual

Page 460

background image

To configure the OSPF default route advertisement:

1. Launch a web browser.

2. In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see Log in to the main UI with a web
browser
on page 27 and the subsections.

The login page displays.

3. Click the Main UI Login button.

The main UI login page displays in a new tab.

4. Enter admin as the user name, enter your local device password, and click the Login

button.

The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.

The System Information page displays.

5. Select Routing > OSPF > Advanced > OSPF Configuration.

The OSPF Configuration page displays. The page shows different sections.

6. Go to the Default Route Advertise Configuration section.

7. Select a Default Information Originate radio button:

Enable: OSPF originates a default route for external LSA advertising. This route
is in the format X.X.X.X/X.X.X.X.

Disable: OSPF does not originate a default route for external LSA advertising.
This is the default settings.

8. Select an Always radio button:

True: OSPF originates a default route regardless of whether a default route exists.

False: OSPF originates a default route only if a default route is already in the
switch’s routing table.

9. In the Metric field, set the metric value of the default route.

The value ranges from 0 to 16777214. The default is 0.

10. Select a Metric Type field radio button:

External Type 1: This metric is computed by adding the internal OSPF cost to
the external redistributed cost.

External Type 2: This metric is computed by using only the external redistributed
cost. This is the default.

11. Click the Apply button.

Your settings are saved.

12. To save the settings to the running configuration, click the Save icon.

Main User Manual

460

Configure OSPF and OSPFv3

Fully Managed Switches M4350 Series Main User Manual