NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 624)

Display DiffServ service statistics
You can display service-level statistical information about all interfaces to which DiffServ
policies are attached.
To display DiffServ service statistics:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select QoS > DiffServ > Advanced > Service Statistics.
The Service Statistics page displays.
6. Use the Search menu to search for DiffServ statistics by interface or member class:
• To search by interface, select Interface, enter the interface in unit/slot/port format
(for example, 1/0/13), and click the Go button.
If the entry exists, the entry is displayed as the first entry, followed by the remaining
entries.
• To search by member class, select Member Class, enter the member class, and
click the Go button.
If an entry with a matching member class exists, the entry is displayed as the first
entry, followed by the remaining entries. An exact match is required.
7. To refresh the page, click the Refresh button.
The following table describes the view-only fields on the page.
Table 154. DiffServ Service Statistics information
Description Field
The interface with a DiffServ policy attached. Interface
The direction (In or Out) for which the DiffServ policy is attached. Direction
Main User Manual 624 Configure Quality of Service
Fully Managed Switches M4350 Series Main User Manual