NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 886)

• Text Configuration: A text-based configuration file enables you to edit a
configured text file (
startup-config ) offline as needed. The most common
usage of text-based configuration is to upload a working configuration from a
device, edit it offline to personalize it for another similar device (for example,
change the device name or IP address), and download it to that device. This is
the default setting.
• DHCP Client Configuration File: The DHCP client configuration file with the
DHCP server (host) information.
7. In the File Path field, specify the path on the USB storage device.
You can use up to 146 characters. The default is blank.
8. In the USB File field, specify a name for the file. This is the name under which the
file will be saved on the USB storage device.
You can enter up to 32 characters.
9. Click the Apply button.
The file is exported (uploaded) to the USB storage device. The page displays
information about the progress of the file transfer.
Update software or download a file
You can download firmware, configuration (ASCII), log (ASCII log), SSL, PEM, or other
types of files to the switch from a file server over a TFTP, SFTP, SCP, or FTP session, from
a computer over an HTTP session, or from a USB storage device.
You can manually check for the latest software version (also referred to as firmware
version), download the firmware to a server or computer, and then download the
firmware to the switch. If firmware release notes are available with new firmware, read
the release notes to find out if you must reconfigure the switch after updating.
In this context, downloading is also referred to as upgrading.
Note the following about SSH and SSL files:
• SSH: For you to be able to download SSH files to the switch, SSH must be
administratively disabled and no active SSH sessions must occur.
• SSL: SSL files contain information to encrypt, authenticate, and validate HTTPS
sessions. For you to be able to download SSL files to the switch, HTTPS must be
administratively disabled.
Main User Manual 886 Maintenance and
Troubleshooting
Fully Managed Switches M4350 Series Main User Manual