NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 563)

Table 136. IPv6 PIM interface configuration information
Description Field
The state of PIM on the interface (Operational or Non-Operational). Protocol State
The IPv6 address and prefix length of the PIM interface. IPv6 Prefix/Length
The IPv6 address of the designated router on the PIM interface. Designated Router
The number of PIM neighbors on the PIM interface. Neighbor Count
Display IPv6 PIM neighbors and search the
PIM neighbor database
You can display the IPv6 PIM neighbor information and search the PIM neighbors
database by interface or by neighbor IP address.
To display IPv6 PIM neighbors and search the PIM neighbors database:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Routing > IPv6 Multicast > IPv6 PIM > PIM Neighbor.
The PIM Neighbor page displays.
6. To search for IGMP group entries by interface or group, select one of the following
options from the Search menu:
• Interface: Select Interface from the menu, specify the interface in unit/port format
(for example 0/8), and click the Go button.
Main User Manual 563 Configure Multicast Routing
Fully Managed Switches M4350 Series Main User Manual