NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 505)

(Continued)
Description Field
The number of link state acknowledgements sent on the interface. LS Acknowledgements
Sent
The number of link state acknowledgements received on the interface. LS Acknowledgements
Received
View or clear OSPFv3 neighbor information
for an interface
If OSPFv3 is enabled, you can view the OSPFv3 neighbors. You can also clear the OSPFv3
neighbor information.
To view or clear OSPFv3 neighbor information for an interface:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Routing > OSPFv3 > Advanced > Neighbor Table.
The OSPFv3 Neighbor Table page displays.
6. To refresh the page, click the Refresh button.
7. To clear the OSPFv3 neighbor information, resetting the fields in the table to default
values, click the Clear button.
8. To save the settings to the running configuration, click the Save icon.
The following table describes the view-only fields on the page.
Main User Manual 505 Configure OSPF and OSPFv3
Fully Managed Switches M4350 Series Main User Manual