beautypg.com

Remove a dns server – NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual

Page 109

background image

The server is added to the table. You can specify up to eight DNS servers. The
precedence is set in the order that you add the servers.

14. To save the settings to the running configuration, click the Save icon.

The following table displays non-configurable DNS server information.

Table 24. DNS server configuration information

Description

Field

The sequence number of the DNS server.

Serial No

The preference of the DNS server. The preference is determined by
the order in which you add the servers.

Preference

Remove a DNS server

You can remove a DNS server that you no longer need.

To remove a DNS server:

1. Launch a web browser.

2. In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see Log in to the main UI with a web
browser
on page 27 and the subsections.

The login page displays.

3. Click the Main UI Login button.

The main UI login page displays in a new tab.

4. Enter admin as the user name, enter your local device password, and click the Login

button.

The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.

The System Information page displays.

5. Select System > Management > DNS > DNS Configuration.

The DNS Configuration page displays.

6. In the DNS Server Configuration table, select the check box for the DNS server.

CAUTION:

If you do not select a DNS server, all DNS servers are removed

after you click the Delete button.

7. Click the Delete button.

Main User Manual

109

Configure Switch System
Information

Fully Managed Switches M4350 Series Main User Manual