NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 202)

The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select System > LLDP > Interface Configuration.
The Interface Configuration.page displays.
6. If a stack is configured, select whether to display the physical interfaces for one switch
or for all switches in the stack:
• Unit ID for a stacked switch: The physical interfaces for the switch with the
selected stack unit ID are displayed.
If no switch stack is configured, the only option is unit ID 1.
• All: The physical interfaces for all switches in the stack are displayed.
If no switch stack is configured, the All option does not have any effect.
7. Select one or more interfaces by taking one of the following actions:
• To configure a single interface, select the check box associated with the interface,
or type the interface number in the Go To Interface field and click the Go button.
• To configure multiple interfaces with the same settings, select the check box
associated with each interface.
• To configure all interfaces with the same settings, select the check box in the
heading row.
The Link Status fields shows whether the interface is up or down.
8. From the Transmit menu, select if the interface can transmit LLDP notifications.
The default is Enable.
9. From the Receive menu, select if the interface can receive LLDP notifications.
The default is Enable.
10. From the Notify menu, select if the interface can support LLDP notifications.
The default is Disable.
11. As an option, configure the following Type Length Value (TLV) information, all of
which are enabled by default:
• Port Description: Select if the interface can send a port description in an LLDP
frame.
• System Name: Select if the interface can send the system name in an LLDP frame.
Main User Manual 202 Configure Switch System
Information
Fully Managed Switches M4350 Series Main User Manual