Delete a mac acl – NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual

Page 796

To change the name of a MAC ACL:

1. Launch a web browser.

2. In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.

The login page displays.

3. Click the Main UI Login button.

The main UI login page displays in a new tab.

4. Enter admin as the user name, enter your local device password, and click the Login

button.

The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.

The System Information page displays.

5. Select Security > ACL > Basic > MAC ACL.

The MAC ACL page displays.

6. Select check box that is associated with the MAC ACL.

7. In the Name field, specify the new name.

8. Click the Apply button.

Your settings are saved.

9. To save the settings to the running configuration, click the Save icon.

Delete a MAC ACL

You can delete a MAC ACL that you no longer need.

To delete a MAC ACL: