Configure vlan acl bindings, Add a vlan acl binding – NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual
Page 832
Table 180. Interface Binding Status information
Description
Field
The selected interface.
Interface
The selected packet filtering direction for the ACL.
Direction
The type of ACL assigned to the selected interface and direction.
ACL Type
The ACL number or name identifying the ACL assigned to the selected interface and
direction.
ACL ID/Name
The sequence number signifying the order of specified ACL relative to other ACLs
assigned to the selected interface and direction.
Sequence Number
Configure VLAN ACL bindings
You can associate a MAC ACL, any type of IPv4 ACL, or an IPv6 ACL with a VLAN. When
you do so, the ACL is applied to all interfaces that are members of the VLAN.
Add a VLAN ACL binding
You can bind a VLAN ID to an ACL and apply the packet filtering direction for the ACL
to either inbound traffic or outbound traffic.
To add a VLAN ACL binding:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Security > ACL> Advanced > VLAN Binding Table.
The VLAN Binding Table page displays.
6. In the VLAN ID field, enter the VLAN ID to which the binding must apply.
Main User Manual
832
Manage Switch Security
Fully Managed Switches M4350 Series Main User Manual