NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 474)

(Continued)
Description Field
Other Designated Router: The interface is connected to a broadcast on which other routers are the designated
router and backup designated router. The switch attempts to form adjacencies to both the designated router
and the backup designated router.
The identity of the designated router for this network, as detected by the advertising
router. The designated router is identified by its router ID. The value 0.0.0.0 means
that no designated router is detected. Designated Router
The identity of the backup designated router for this network, as detected by the
advertising router. The backup designated router is identified by its router ID. The
value 0.0.0.0 means that no backup designated router is detected. Backup Designated
Router
The number of times the OSPF interface changed its state Number of Link Events
The number of opaque LSAs for which the flooding scope is the link on the interface Local Link LSAs
The sum of the checksums of local link LSAs for the link Local Link LSA
Checksum
View or clear OSPF statistics for an interface
If OSPF is enabled, you can view or clear OSPF statistics for an interface.
To view or clear OSPF statistics for an interface:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Routing > OSPF > Advanced > Interface Statistics.
The OSPF Interface Statistics page displays.
6. From the Interface menu, select the interface.
7. To refresh the page, click the Refresh button.
Main User Manual 474 Configure OSPF and OSPFv3
Fully Managed Switches M4350 Series Main User Manual