beautypg.com

Configure mld snooping for vlans manually – NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual

Page 330

background image

Configure MLD snooping for VLANs
manually

You can manually configure the settings for MLD snooping for VLANs, which is used to
build forwarding lists for IPv6 multicast traffic.

You can also configure MLD snooping for VLANS automatically (see Configure MLD
snooping for VLANs automatically with MLD Plus mode
on page 328).

To configure the settings for MLD snooping for a VLAN manually:

1. Launch a web browser.

2. In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see Log in to the main UI with a web
browser
on page 27 and the subsections.

The login page displays.

3. Click the Main UI Login button.

The main UI login page displays in a new tab.

4. Enter admin as the user name, enter your local device password, and click the Login

button.

The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.

The System Information page displays.

5. Select Switching > Multicast > MLD Snooping > MLD VLAN Configuration.

The MLD VLAN Configuration page displays.

6. Either specify a new VLAN or change an existing VLAN:

Specify a new VLAN: In the VLAN ID field, enter the ID for a new VLAN.

Change an existing VLAN: Select the check box for an existing VLAN.

7. From the Fast Leave menu, select to enable or disable the MLD snooping Fast Leave

mode.

8. In the Membership Interval field, specify the period for the group membership

interval of MLD snooping.

The range is from the period that you specify in the Maximum Response Time field

plus 1

to 3600 seconds. The default is 260 seconds.

9. In the Maximum Response Time field, specify the period for the maximum response

time of MLD snooping.

The range is from 1 second to the period that you specify in the Membership Interval

minus 1

. The default is 10 seconds.

Main User Manual

330

Configure Switching Information

Fully Managed Switches M4350 Series Main User Manual