beautypg.com

NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual

Page 141

background image

4. Enter admin as the user name, enter your local device password, and click the Login

button.

The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.

The System Information page displays.

5. Select System > Services > DHCP Relay.

The DHCP Relay page display.

6. Scroll down to the lower DHCP relay section at the bottom of the page.

If no routing interfaces are configured on the switch. the DHCP Relay configuration
table does not display on the page.

7. Select whether to display physical interfaces, VLANs, or both by clicking one of the

following links above the table heading:

1 or Unit ID for a stacked switch:

-

1: If no switch stack is configured, the physical interfaces for the switch are
displayed.

-

Unit ID for a stacked switch: If a switch stack is configured, the physical
interfaces for the switch with the selected stack unit ID are displayed.

VLANS: Only VLANs are displayed.

All: Both physical interfaces and VLANs are displayed, or for a switch stack, both
physical interfaces on all switches and VLANs are displayed.

8. Select one or more interfaces by taking one of the following actions:

To configure a single interface, select the check box associated with the interface,
or type the interface number in the Go To Interface field and click the Go button.

To configure multiple interfaces with the same settings, select the check box
associated with each interface.

To configure all interfaces with the same settings, select the check box in the
heading row.

9. Select one of the following Server Override Mode radio buttons:

Disable: Suboption 5 and suboption 11 are not added to Option 82 of the
incoming DHCP packet.

Suboption 5 specifies the IP subnet from which the DHCP server must assign an
IP addresses.

Suboption 11 specifies that the server ID can be replaced with a new ID.

Enable: Suboption 5 and suboption 11 are added to Option 82 of an incoming
DHCP packet.

10. From the Source Interface menu, select an interface or VLAN.

Main User Manual

141

Configure Switch System
Information

Fully Managed Switches M4350 Series Main User Manual