NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 441)

The following table describes the view-only fields on the page.
Table 115. RIP interface configuration information
Description Field
The number of RIP response packets received by the RIP process that
were subsequently discarded for any reason Bad Packets Received
The number of routes in valid RIP packets that were ignored for any reason
(for example, unknown address family, or invalid metric) Bad Routes Received
The number of triggered RIP updates sent on the interface. This explicitly
does not include full updates sent containing new information. Updates Sent
The IP address of the router interface IP Address
Indicates if the RIP router interface is up or down Link State
Configure the RIP route redistribution
settings and display the route redistribution
summary
You can configure the RIP route redistribution settings and display the route redistribution
summary.
To configure RIP route redistribution settings and display the route redistribution
summary:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Routing > RIP > Advanced > Route Redistribution.
The Route Redistribution page displays.
Main User Manual 441 Manage Routing
Fully Managed Switches M4350 Series Main User Manual