NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 666)

The Certificate Present field shows Yes, indicating that the certificate is present.
10. To save the settings to the running configuration, click the Save icon.
Activate a certificate
After you add a self-generated SSL certificate or transfer (upload) and external certificate
authority (CA)-signed certificate to the switch, you can activate the certificate.
To activate a certificate:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Security > Access > HTTPS > Certificate Management.
The Certificate Management page displays.
6. From the Certificate Number menu, select the certificate, that is, select 1 or 2.
Your selection determines if the first or second certificate is activated.
7. Select the Activate Certificate radio button.
8. Click the Apply button.
Your settings are saved and the certificate now active.
9. To save the settings to the running configuration, click the Save icon.
Delete an SSL certificate
NOTE: Before you can delete a certificate, you must disable HTTPS (see
Configure the HTTPS access settings on page 661) and log back in to the device
UI over an HTTP session. After you delete the certificate, you can reenable
HTTPS and log back in to the device UI over an HTTPS session.
Main User Manual 666 Manage Switch Security
Fully Managed Switches M4350 Series Main User Manual